Page 230 - Cornwell Product Catalog
P. 230

  228
 CUTTING TOOLS
   PART NUMBER
   DESCRIPTION
   CBSSRI142
 1/4” Stud Remover - 3/8” Dr.
 CBSSRI5162
  5/16” Stud Remover - 3/8” Dr.
 CBSSRI383
  3/8” Stud Remover - 1/2” Dr.
 CBSSRI7163
   7/16” Stud Remover - 1/2” Dr.
     PART NUMBER
   DESCRIPTION
   CBSMSRI62
 6MM Stud Remover - 3/8” Dr.
 CBSMSRI82
  8MM Stud Remover - 3/8” Dr.
 CBSMSRI103
   10MM Stud Remover - 1/2” Dr.
   CBSMSRI123
  12MM Stud Remover - 1/2” Dr.
    PART NUMBER
   DESCRIPTION
   NOMINAL
   LS19260
  Remover #1
  1/4” (6MM)
   LS19270
 Remover #2
 5/16” (8MM)
 LS19280
  Remover #3
  3/8” (10MM)
 LS19290
  Remover #4
  7/16” (11MM)
 LS19300
   Remover #5
   1/2” (13MM)
   LS19310
  Remover #6
  9/16” (14MM)
  PART NUMBER
   BOLT SIZE
   DRILL SIZE
   LS62560
 1/4"
 1/8"
 LS62570
  5/16"
  11/64"
 LS62730
   3/8"
   15/64"
   LS62580
 7/16"
 9/32"
 LS62590
   1/2"
   3/8"
  EXTRACTORS
CBS4SRIS
4 Piece Fractional Stud Remover/ Installer Set
Designed to reach studs in difficult work areas. 􏰀igh polish, chrome plated finish for corrosion protection. Heavy duty blow molded box.
INCLUDES:
CBS4MSRIS
4 Piece Metric Stud Remover/Installer Set
Designed to reach studs in difficult work areas. 􏰀igh polish, chrome plated finish for corrosion protection. Heavy duty blow molded box.
INCLUDES:
LS19250
6 Piece Bolt, Nut, and Stud Remover Set
Removes standard and metric bolts,
nuts, and studs from 1/4” to 9/16”
(6MM to 14MM). To use, drive the
proper size remover over the bolt head,
nut, or stud. The remover spine cuts into the bolt head or threads for a sure grip.
INCLUDES:
MH29895
Stud Extractor
Will remove rusted, broken, smooth, threaded and stripped studs. 􏰁d􏰂ustable to fit studs from 􏰃􏰄􏰅􏰆 to 􏰃􏰄􏰇􏰆 and 􏰈􏰉􏰉
to 12MM. Can be used to insert studs. Works with a 3/8” impact wrench. The impact wrench can be inserted directly into the stud extractor.
LS71200
Stud Remover
Removes studs from engine blocks, exhaust manifolds, cylinder heads and other applications. Allows for easy removal of studs. Tool has two holes, 1/2” (14MM) and 􏰊􏰄􏰅􏰆 􏰋􏰃􏰌􏰉􏰉􏰍 for optimum fit, minimi􏰎ing damage to threads. Range: 3/8” (10MM) - 3/4” (19MM). Design allows tool to grip flush with mounting surface of the stud so it can grab studs that are broken off very close to the mounting surface. Use with 1/2” square drive.
KD1708DD
Stud Extractor
Use 1/2” square drive tools to operate. Removes 1/4” (6MM) to 3/4” (19MM) studs. Drive socket will not bind. Cam wheel grips within 9/32” of flat surface to hold stud.
LS62900
Super Out Set
Super strong extractor set made of
a special hardened, shock-resistant
tool steel. Works on both left and
right hand threads. Cut straight
into bolts, eliminating wedging or further tightening of frozen bolts and screws.
INCLUDES:
        Use each tool properly..
     HAND TOOLS

   228   229   230   231   232