Page 342 - Cornwell Product Catalog
P. 342

  340
    PART NUMBER
  TYPE
  SHANK SIZE
   􏰄􏰌􏰍􏰎􏰏􏰐
6" Pneumatic Hammer
  0.401
 􏰄􏰌􏰍􏰎􏰑􏰒
 8" Pneumatic Hammer
 0.401
 􏰄􏰌􏰒􏰋􏰋􏰍
  12" Pneumatic Hammer
  0.401
   􏰄􏰌􏰒􏰋􏰋􏰒
 18" Pneumatic Hammer
   0.401
                AJMBB38
3/8” Pneumatic Bolt Breaker
Used to remove stubborn bolts in tight areas in conjunction with an air hammer.
AJMBB12
1/2” Pneumatic Bolt Breaker
Used to remove stubborn bolts in tight areas in conjunction with an air hammer.
   􏰀􏰁􏰁􏰂􏰃􏰃􏰄􏰅􏰆􏰂􏰃 AIR CHISELS & PUNCHES
OF1958
Slotted Style Panel Cutter
Leaves a clean and smooth edge with the cut curling up through the slot. Length: 6”; Weight: 6 oz. Shank size: 0.401.
OF1959
Sheet Metal Trimmer
Not designed to be a panel cutter. For use on lighter weight sheet metal. Use as an edger without stretch or distortion eliminating much grinding. Length: 6”; Weight: 6 oz. Shank size: 0.401.
OF1963
6" Smoothing Hammer
Designed for numerous automotive jobs. Use for body forming on fenders, hoods and panels against a body dolly. Excellent for any hammering operations such as ball joints and U-joints. Overall length: 6". 1" face. S-2 tool steel. Heat treated. Black oxide for corrosion resistance. 0.401 shank.
PNEUMATIC
HAMMERS
Excellent for hammering operations such as U-joints, ball joints and body forming. 􏰇􏰈tended lengths designed for difficult to access applications. 􏰉.􏰊􏰉􏰋 shank. Highest quality S2 tool steel. Heat treated for long lasting durability. Black oxide finish for corrosion resistance.
OF1982
Long Body Hammer
For any hammering operation such as U-joints, ball joints and for body forming work. Longer length is needed for many quick change holders to provide a better striking force. Length: 4”.
OF1997
Taper Punch
Has 1/8” diameter point for driving out pins and rivets. Length: 6-1/2”; Weight: 6 oz. Shank size: 0.401.
OF1986
18" Cold Chisel
Cuts bolts, nuts, tees, angles or frame members. Extra 18” length for hard-to-reach areas; Weight: 1 lb. Shank size: 0.401.
OF2010
1-1/8” Pneumatic Scraper
Removes gaskets, rust, undercoating, paint, remove floor tile, plaster or roof coatings. 1-1/8” wide blade is offset for hand clearance. Length: 18”. Shank size: 0.401.
OF2011
3/8” Pneumatic Taper Punch
Has 3/8” diameter point for driving out pins and rivets. Length: 18”. Shank size: 0.401.
OF2016
2" x 18" Pneumatic Scraper
􏰇􏰈tended lengths designed for difficult to access applications. 􏰉.􏰊􏰉􏰋 shank. Highest quality S2 tool steel. Heat treated for long lasting durability. Black oxide finish for corrosion resistance.
  OF1968
Tailpipe Cutoff Tool
Thin blade with sharp concave edge cuts off tailpipes with ease. Length: 7-3/4”; Weight: 8 oz. Shank size: 0.401.
OF1972
6" Cold Chisel
Cut bolts, nuts, tees, angles or frame members. Dozens of uses.
OF1973
8" Cold Chisel
Cut bolts, nuts, tees, angles or frame members. Dozens of uses.
OF1979
Taper Punch
3/8” diameter point. Punch holes in sheet metal, drive rivets or hinge pins or use for peening or crimping bodies. Length: 6”; Weight: 6 oz. Shank size: 0.401.
OF1975
Rivet and Bolt Cutter
Shears rivets and bolts in bumpers, grills, frames and brackets. Length: 6-1/2”; Weight: 6 oz. Shank size: 0.401.
OF1976
Scraper
Removes gaskets, rust, undercoating, paint, remove floor tile, plaster or roof coatings. 1-1/8” wide blade is offset for hand clearance. Length: 8”; Weight: 8 oz. Shank size: 0.401.
 Use each tool properly..
     POWER TOOLS


























   340   341   342   343   344