Page 396 - Cornwell Product Catalog
P. 396

  394
 TEST & MEASUREMENT
CBPDCT1
Extra Long Heavy Duty Circuit Tester
CIRCUIT TESTERS
  Long 7” probe shank allows
access to difficult to reach areas
for testing electrical circuits and
locating shorts, grounds, and open circuits. 12 foot heavy-duty blue coil cord lead. OW363310 Repl. Bulbs (10)
CBPDCT2
Heavy Duty Logic Probe Tester
LS28830
3-48V Digital Test Light
Used to check polarity on a circuit. Digital
circuit tester with LCD display. Provides
“no guess” accurate voltage reading for
12, 24 and 48V systems. Tester will light
up red for power and green for ground on
both sides of the handle during testing.
12 foot coiled cord with gator clip. Great for heavy duty and hybrid vehicles.
OW3633
Mini Coil Cord Circuit Tester
Locate hot circuits and troubleshoot primary
circuits on all 6 and 12 volt systems. Heavy
duty lead and stainless steel probe for fast,
safe, and accurate low voltage testing.
Small, ergonomic design for use in tight
areas. Needle-sharp, stainless steel probe
for easy wire piercing. 12 ft. coil cord test
lead made from durable, high visibility, heat
and oil resistant material. Threaded probe to
add other screw-on type accessories. Bright, high intensity bulb for easy visibility. Molded strain relief at both ends prevents broken wires. Heavy duty clip. OW363310 Repl. Bulbs (10)
SFCT8002
Professional Cordless Circuit Tester
Ideal for autos, trucks, trailers, RVs and boats. Solid state electronic voltage detector does not need wire or clip connector to ground. Safe to use around automotive microcomputer controllers due to negligible current draw (about 20 microamps). High impedance safe with auto electronic control modules. Cordless, 1-1/2V “N” batteries installed. Operates on positive DC voltages between 3 volts and 24 volts
in battery powered systems. Chrome plated metal construction with buzzer, LED indicator light for audible and visual signals, and vibration indicator. Tester MUST NOT be used on AC electrical systems or any voltages higher than 24 volts. IBDRY1390 Repl. “N” Battery
TE27
Heavy Duty Circuit Tester
Checks 6 and 12 volt systems. Heavy duty grounding clip with insulating boot. Five feet of tough flexible rubber wire retained in spring supported strain relief. Lead wire permanently attached. Clear plastic handle makes bulb highly visible.
TE27010 Replacement Bulb
PWPECT3000
Short/Open Finder
Makes locating short and open
circuits quicker and more accurate
than ever before. When the
transmitter is connected to an
isolated circuit, it will quickly determine if the circuit has an open or if the circuit is shorted. The receiver is designed to detect the signal emitted from the transmitter through the vehicles wiring, notifying the user of distance and direction with adjustable height sensitivity. Features Include: Auto locking signal, distance indication from source wire, directional indication to the short, 10 minute auto shut off, shorted or open circuit indication, and an integrated flashlight in receiver.
  Multi functional design allows
testing range of 3-26 volts. Bright
red and green LEDs interpret
voltage signals such as ground,
power and frequency. Tests fuel injectors, solenoids, presence of serial data and tach reference signals. Output tests on MAF, Cam, Crank, Hall Effect VRS sensors and more. High impedance input compatible with computer circuits and sensors. Air bag safe. 12 ft. heavy-duty twin clip blue coil cord. Checks 6,12 and 24 volt systems.
CBPDCT3
Heavy Duty Straight Cord Circuit Tester
Designed for testing electrical circuits and locating shorts, grounds, and open circuits. 5 foot heavy-duty cord.
  OW363310
Repl. Bulbs (10)
 CBPDCT4
Coil Cord Circuit Tester
 Locate hot circuits and
troubleshoot primary circuits on
all 6 and 12 volt systems. Heavy
duty lead, heavy duty clip, and
stainless steel probe for fast,
safe, and accurate low voltage testing. 12 ft. coil cord test lead made from durable, high visibility, heat and oil resistant material. Bright, high intensity bulb for easy visibility. Molded strain relief prevents broken wires.
OW363310 Repl. Bulbs (10)
CTGCT100
Digital Circuit Tester
Use on 6V, 12V, 24V DC systems
(Warning: For DC circuits only).
Backlit LCD display. Test for
voltage on both power and
ground in DC circuits. Stainless steel probe. Coiled cord with reach up to 12 ft. Range: 3.8V to 31.4V DC. Resolution: 0.1V DC. Accuracy: ±0.3V. LCD Display. Red LED = Power Connection. Green LED = Ground Connection. Operating Temperature: 0-120°F. Surge protected. Shank length: 3.5”.
  Use each tool properly..
     DIAGNOSTICS & BATTERY SERVICE
























   394   395   396   397   398