Page 433 - Cornwell Product Catalog
P. 433

  LS27490
E-4 Torx® Socket
1/4” Drive. Extra Deep Socket. For Electrical Ignition Switches on GM.
LS37160
Disconnect Pliers
Disconnects fuel line and EVAP
line fittings with tabs that must
be depressed to disengage. Low-
profile design with 􏰀􏰁􏰂 bend allows
the tool to fit between the top of
the fuel tank and vehicle. Works
great on Delphi two tab connectors
and some import vehicles. Can also
be used on some electrical connectors. Spring action makes tool easier to use.
LS63000
Fuel Tank Lock Ring Tool
Used to remove and install plastic fuel tank lock rings from 4” to 7-1/4” without damage. Works on the new smaller GM serrated rings and traditional rings.
LTHLT940
Gas Tank Fuel Pump Removal Tool
Removes plastic fuel pump retaining rings. 􏰃ni􏰄ersal ad􏰅ustable design fits most plastic retaining rings. Prevents damage to original pump retaining ring. Use with 1/2” drive extension and ratchet. Use to re-install old retaining ring.
FUEL LINE DISCONNECT TOOLS
􏰈pecial low􏰉profile design works
in close quarters on GM, Ford, and Chrysler vehicles where there is limited clearance between the fuel filter, fuel rails, or sending units. 􏰊ools are designed to access the center port on GM fuel tank sending units.
OW6594
Ford Quick Release Disconnect Tool
Use to disconnect the high-pressure oil rail supply line from the fuel rail when removing fuel injectors. Works on the 6.0 diesel engine found in 2003-newer F-250, F-350, F-450, F-550 trucks, and Ford Excursions.
OW6599
Universal Fuel Tank Lock Ring Wrench
   Universal design allows tool
to fit fuel tank lock rings on
Ford, Chrysler, and GM vehicles
with gas engines. Works on:
2004-newer Ford F-150 trucks;
2004-newer Dodge/Chrysler PT
Cruiser, Dakota, Durango, and
minivans; 2004-newer Chevrolet 1/2-ton and 3/4-ton trucks; and 2005-newer Jeep vehicles. Easily remove and install the lock ring on the fuel tank while servicing the fuel pump or fuel sending unit. Use with a 1/2” ratchet or breaker bar.
LS12100
Oxygen Sensor Socket
Removes and installs oxygen sensors on most Domestic and some Imports. Special 7/8” socket with cutaway slot to provide clearance for wire harness. 􏰆ro􏰄ides ade􏰇uate depth to fit o􏰄er sensor. Heat-treated alloy steel. Use with 3/8” square drive or 1” wrench.
LS12230
Oxygen Sensor Rethreader
Cleans threads in oxygen sensor
holes. Use with 3/4” hex socket or 3/8” square drive. Size M18 x 1.5. Also works on M18 x 1.5 spark plug threads. IMPORTANT: Use anti-seize.
LS61140
Diesel Filter Wrench for Ford Transit
Used to remove and install fuel
filter elements on 􏰋.􏰌L diesel
Ford Transit engines. Works on
2015 to current 150, 250, and 350
models. The tool is notched to
match the canister design to help eliminate slipping and damage to
the canister. The tool also has a
3/8” square drive to provide extra leverage.
FUEL INJECTION SERVICE
       PART NUMBER
   SIZE
   APPLICATIONS
   OW6509
 3/8” x 5/16”
 Service 1999-current GM pickups, and 2000-current Suburban, Tahoe, and Yukon gasoline vehicles
 OW6511
   3/8” x 1/2”
   Service 2001-current 3/4- and 1-ton trucks with the Duramax Diesel engines
   See page 640 for safety warnings.
WWW.CORNWELLTOOLS.COM
  431
UNDERHOOD
































   431   432   433   434   435