Page 443 - Cornwell Product Catalog
P. 443

   HR189
Harmonic Balancer Puller
Designed to pull balancers,
vibration dampers, pulleys
and gears with tapped holes.
The four (4) slots in the yoke
allow tool to be used for
either two (2) or three (3) hole
applications. The removable floating swivel prevents damage to shaft ends. Comes complete the necessary side screws and center screw. Zinc plated. Yoke is forged from alloy steel, heat treated.
INCLUDES:
KD2897D
Pulley Puller/ Installer Set
Remove pressed-on alternator
and power steering pulleys on late-model GM, Ford and Chrysler engines. Threaded end installs late-model GM alternator and power steering pulleys, including Quad
4. Reverse the jaws to pull the alternator internal bearing.
INCLUDES:
HARMONIC BALANCER TOOLS
 PART NUMBER
   DESCRIPTION
   KD289780
 Puller Body
 KD289781
  Jaw & Sleeve Assembly
 KD289782
   Jack Screw
   KD289783
 Button
 KD289784
  Bearing and Washer
 KD289785
  Puller Pin for Quad 4
 KD289786
   Screw Installer/Quad 4
   KD289787
 Puller Pin/GM 3.1
 KD289788
  Screw Installer/GM 3.1
 KD289789
  Screw Installer/Ford 4.6
 KD289790
   Screw Installer/General Duty
   QTY.
   PART NUMBER
   DESCRIPTION
   1
 HR1891
 Yoke Only
 1
  HR1892
  Replacement Screw
 1
  HR189300
  Swivel & O-Ring
 3
   HR189500
   3/8”-24 x 2” Side Screw
   3
 HR189600
 5/16”-18 x 2” Side Screw
 2
  HR189700
  3/8”-16 x 4” Side Screw
 3
   HR189800
   M8 x 1.25 x 80MM Side Screw
     HR38700
Long Reach Balancer/ Puller Installer
LS39000
“No-Slip” Pulley Puller/Installer
Removes and installs pressed on power steering, alternator and air pump pulleys. The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys. Fits most domestic models including GM 3.1 and Quad 4 engines. Works on traditional
V shaped pulleys and serpentine
belt system pulleys. Patented
design traps the pulley and provides a gripping handle. Tool comes with detailed instructions and a heavy-duty plastic storage case.
INCLUDES:
 Extra long reach tool kit for installing
underdrive/oversized pulleys and for
applications with recessed threads
on the crankshaft. Installs harmonic
balancer pulleys on many popular
late model Ford, GM, Dodge and Chrysler vehicles with V6 and V8 engines with recessed threads for the crank pulley bolt or utilize an underdrive pulley or
both. Traditional type balancer pulley installers will not work in many of these applications. Features four high quality, long-reach threaded adapters and a universal nut. Works on: 2004-2012 Ford 3.0L, 3.5L, 4.6L, 5.4L, 6.8L; 2008-2012 GM 4.8L, 5.3L, 5.7L, 6.0L, 7.0L; and 2006-2012 Dodge/Chrysler 3.7L, 4.7L, 5.7L, 6.1L.
HRC6667
GM/Chrysler Harmonic Balancer Puller
Designed for removing
damper pulleys in tight engine
compartments, without removing
the radiator. Kit contains the 3-jaw
puller, four lengths of forcing rods,
and a forcing screw with a 3/8”
square drive for ratchet use, and
a 3/4” hex for wrench or socket
use. APPLICATIONS: GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L and 8.1L V8s; Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988; Chevrolet trucks 2003-later 4.2L I6, 2004-current 3.5L I5 and 2005-current 2.8L I4 ; Chrysler engines from 1990-later, including 2.0L, 2.4L-4s; plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s; Ford 1995-later V8 engines with 3 spoke pressed on damper; and Mitsubishi Eclipse 1995-1999 2.0L DOHC non-turbo.
  PART NUMBER
   DESCRIPTION
   LS38910
 Short 3/8” x 16 Installing Adapter
 LS38920
   Short 8MM Installing Adapter
   LS38930
 Med. 3/8” x 16 Installing Adapter
 LS38940
  Short Pin
 LS38950
  Long Pin
 LS38960
   Long 3/8” x 16 Installing Adapter
   LS38990
 Puller Screw
 LS39010
  Small Jaw
 LS39020
  Large Jaw
 LS39030
   Handle
   LS39040
 Washer
 LS39050
  Nut
 LS39070
  Pusher Shaft
 LS40060
   Bearing
   HR3861 HR3862 HR3863 HR3864 HR3865
Long Shaft Medium Shaft Short Shaft Screw Bolt Hook
See page 640 for safety warnings.
WWW.CORNWELLTOOLS.COM
  441
ENGINE TOOLS
 UNDERHOOD
   441   442   443   444   445