Page 448 - Cornwell Product Catalog
P. 448

  446
 ENGINE TOOLS
    PART NUMBER
   DESCRIPTION
   HR7521
 Variable Pin Spanner Wrench
 HR7522
   10MM Adapter
   HR7523
 3.5MM Adapter
 HR7524
  4MM Adapter
 HR7525
  4.5MM Adapter
 HR7526
  5MM Adapter
 HR7527
   6MM Adapter
   HR7528
  7MM Adapter
    LS37100
Ford Timing Tool
For use when servicing the timing chain on Ford V6 3.5L and 3.7L engines. Helps ensure camshaft alignment during removal and installation of
the timing chain. Applications: 3.5L - 2007 and newer, 3.7L -2009 and newer.
SLC96800
Universal Cam Gear Holder
Designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. The rear pulleys on these models are in very close pro􏰅imity to the shock tower making remo􏰁al and replacement difficult without this locking device.
 LS37410
Ford Camshaft Alignment Tool
OW6613
Variable Pin Spanner Wrench Set
􏰀ni􏰁ersal design fits many different types of pulleys ha􏰁ing slots or holes, including camshaft pulleys and crankshaft pulleys. Wrench is adjustable from 1-1/4" to 5". Works with a 1/2" drive ratchet or breaker bar.
The camshaft bar and long TDC timing pin are used on 2.0L DOHC Zetec engines found in 1994-2003 Ford and Mercury vehicles. The camshaft bar and short TDC timing pin are used on 2004-2012 2.5L DOHC, 2.3L DOHC 4V and 2.0L DOHC engines that are found in Ford, Mercury and Mazda vehicles. The camshaft alignment bar can also be used by itself on 2.0L DOHC engines in 1993-1994 Ford Probe.
 LS38220
Universal Cam Adjuster
Tool is designed to both hold and turn cam sprockets. Tool is needed to turn the cam sprockets to adjust the cam position. Also can be used to hold the cam sprocket in place when removing the cam bolt. Will work on all single and dual overhead cam sprockets with holes.
SLC92350
Seal Removal Pliers
Remove the valve stem
seals used on most
overhead camshaft engines.
These pliers feature “gripping” serrations in the tip allowing them to grasp both original e􏰄uipment and aftermarket seals regardless of their configuration. 􏰂he pliers are made from quality heat-treated steel and come with easy grip handles.
HRC6613
Variable Pin Spanner Wrench Set
􏰂he uni􏰁ersal design of this wrench ensures that it will fit on a wide 􏰁ariety of pulleys that feature holes or slots, including both crankshaft and camshaft pulleys. This versatile wrench is widely adjustable from 1-1/4” up to 5”. Use with a 1/2” drive ratchet or breaker bar. The tool accommodates the most common metric si􏰃e pin configurations.
INCLUDES:
  Use each tool properly..
     UNDERHOOD



















































   446   447   448   449   450