Page 531 - Cornwell Product Catalog
P. 531

   FA153G
Cross Chisel Hammer
􏰒􏰓cellent for finishing. 􏰛ross peen used for working in sharp corners around mouldings and for caulking. 􏰏ound Face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰚 diameter. 􏰛hisel􏰂 􏰉􏰚 long. 􏰌eight􏰂 􏰍.􏰕􏰐 lbs.
FA153GB
Curved Cross Chisel Hammer
􏰒􏰓cellent for finishing. 􏰛ross peen used for working in sharp corners around mouldings and for caulking. 􏰌ell balanced cur􏰖ed chisel for work in close places. 􏰏ound Face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰈 diameter. 􏰛hisel􏰂 􏰉􏰈 long. 􏰌eight􏰂 􏰍.􏰕􏰘 lbs.
FA153S
Cross Chisel Shrinking Hammer
􏰒􏰓tra wide face is cross groo􏰖ed and used for shrinkage on large surfaces. 􏰛hisel end used on sharp corners. Flat 􏰏ound Face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰈 diameter. 􏰛hisel􏰂 􏰉􏰈 long. 􏰌eight􏰂 􏰍.􏰕􏰐 lbs.
FA155G
Fender Bumper
For bumping where hand and dolly cannot reach. 􏰙mple clearance for obstructions. 􏰙lso used as a caulking iron. Length of head􏰂 􏰕􏰄􏰉􏰆􏰋􏰚. 􏰌eight􏰂 􏰊.􏰕 lbs.
FA158G
General Purpose Pick Hammer
􏰀edium si􏰁e point and reach for general work. Low crown strawberry point for perfect balance. Face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰈 round point, 􏰉􏰆􏰉􏰊􏰈 radius. Length of pick end􏰂 􏰉􏰄􏰉􏰆􏰋􏰈. 􏰌eight􏰂 􏰍.􏰅􏰃 lbs.
FA158GMS
Sharp Point Finishing Hammer
􏰎harp point 􏰄 long reach. For low spots on high crown panels and other work with long reach. 􏰏ound face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰈 diameter. 􏰎harp point􏰂 􏰉􏰈 long. 􏰌eight􏰂 􏰍.􏰐􏰅 lbs.
FA162G
Shrinking Hammer
For work in close 􏰑uarters. 􏰒􏰓pertly machined serrations on the round face. 􏰔lain s􏰑uare face􏰂 􏰃􏰄􏰃􏰆􏰕􏰈. 􏰏ound serrated face􏰂 􏰃􏰄􏰃􏰆􏰋􏰈 diameter. 􏰋􏰈 o􏰖erall. 􏰌eight􏰂 􏰍.􏰐􏰕 lbs.
FA164G
Utility Pick Hammer
􏰗lunt point, short reach. For low spots in high􏰄crown panels and other work with small clearance. Face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰈, round point, 􏰘􏰆􏰉􏰊􏰈 radius. Length of pointed end􏰂 􏰊􏰈 head, 􏰋􏰈 o􏰖erall. 􏰌eight􏰂 􏰍.􏰐􏰘 lbs.
FA167G
Lightweight Dinging Hammer
􏰎hort head length ideal for tight spaces. 􏰜sed to bump odd fender or bumper contours. 􏰏ound face􏰂 􏰃􏰄􏰅􏰆􏰃􏰇􏰚 diameter. 􏰝􏰖erall head length􏰂 􏰃􏰄􏰐􏰆􏰕􏰚. 􏰃􏰊􏰚 wooden handle. 􏰌eight􏰂 􏰍.􏰇􏰘 lb.
FA170G
Door Skin Hammer
For high crown work and finishing, without poking holes in thin sections. Dimensions􏰂 􏰝􏰖erall Length􏰂 􏰇􏰄􏰃􏰆􏰊􏰚􏰞 􏰟andle􏰂 􏰃􏰊􏰚􏰞 􏰌eight􏰂 .􏰅􏰋 lbs.
REPLACEMENT HAMMER HANDLES
BODY HAMMERS
          PART NUMBER
  TYPE
   DESCRIPTION
  FAHH42B
   Hickory
  For FA-prefixed body hammers
  FAHH42BN
  Hickory
 For new body hammers
 FAHH45
 Hickory
  For FA155G hammer
 FAHHBFFG
  Fiberglass
   For all body hammers with 12” handle.
  SH55090
     For ALL SH-prefixed wood handle hammers, Made in U.S.A.
  SH55095
   Fiberglass
  For ALL SH-prefixed fiberglass handle hammers, Made in U.S.A.
    See page 640 for safety warnings.
WWW.CORNWELLTOOLS.COM
  529
METAL WORKING
 PAINT & BODY










































   529   530   531   532   533