Page 575 - Cornwell Product Catalog
P. 575

 MMWP125I
120V Inverter Plasma Cutter
Cuts mild steel up to 1/8” and all electrically conductive materials. Also cuts with a narrow kerf that results in a smaller heat affected 􏰀one for reduced warping. 􏰂ilot arc for easy starts and enables the user to cut fence or e􏰃panded metal. 􏰄uilt􏰅in air pressure ad􏰆ustment and gauge, indicator lights for 􏰇uick trouble shooting, and thermal o􏰈erload protection. 􏰉nput power􏰊 􏰋􏰌􏰍􏰎, 􏰌􏰍􏰏 􏰐􏰍􏰑􏰒􏰍 􏰓􏰀 single phase. 􏰔􏰌􏰍􏰎 open circuit 􏰈oltage. 􏰕utput 􏰎oltage􏰊
􏰋􏰒􏰏. Duty 􏰖ycle􏰊 􏰔􏰐􏰗 􏰘 􏰋􏰒􏰏. 􏰙e􏰇uires 􏰖ompressed 􏰏ir􏰊 􏰚.􏰐 􏰖F􏰛 􏰘 􏰒􏰍 􏰂􏰜􏰉. 􏰝eight􏰊 􏰋􏰞 lbs.
MMWP375DVI
Dual Voltage Inverter Plasma Cutter
Cuts up to 3/8” steel at a travel speed of 10 inches per minute when operating on 230V
AC power. Use the included adapter cord to run this unit off 120V AC power for a cutting capacity on steel of up to 1/8” at a travel speed of 10 inches per minute. It cuts all electrically conductive materials. It cuts a narrow kerf that results in a smaller heat affected zone for reduced warping. Lightweight 􏰡􏰋􏰟.􏰞􏰐 lbs.􏰢, compact, in􏰈erter design for greater portability. Pilot arc for easy starts. Built-in air pressure adjustment and gauge, indicator lights for quick trouble shooting and thermal overload protection. Input power: 120V, 20A 50/60 Hz single phase; 230V, 28A 50/60 Hz single phase. 320V open circuit voltage. Output Voltage: 15 to 40A. Duty Cycle: 35% @ 16A (120V Power); 35% @ 40A (240V Power). Requires Compressed 􏰏ir􏰊 􏰚.􏰐 􏰖F􏰛 􏰘 􏰒􏰍 􏰂􏰜􏰉. 􏰝eight􏰊 􏰋􏰟.􏰞􏰐 lbs.
MMWP625I
230V Inverter Plasma Cutter
􏰖uts up to 􏰟􏰑􏰋􏰒􏰠 steel at a tra􏰈el speed of 􏰋􏰍 inches per minute when operating on 􏰌􏰔􏰍􏰎 􏰏􏰖 power. It cuts all electrically conductive materials. It cuts a narrow kerf that results in a smaller heat affected zone for reduced warping. Lightweight (30.85 lbs.), compact, inverter design for greater portability. Pilot arc for easy starts. Built-in air pressure adjustment and gauge, indicator lights for quick trouble shooting and thermal overload protection. Input power: 230V, 42A 50/60 Hz single phase. No-Load Voltage: 310V DC. Output Voltage: 20 to 60A DC. Duty Cycle: 30% @ 60A. Requires Compressed Air: 4.5 CFM @ 70 PSI (do not exceed 100 PSI). Weight: 30.85 lbs.
PLASMA CUTTERS
    WELDING
   SPECIFICATIONS
 PART NUMBER
 INPUT VOLTAGE
 INPUT CURRENT (AMPS)
 OUTPUT VOLTAGE
 CUTS UP TO
 DUTY-CYCLE
 DIMENSIONS (W x D x H)
 WEIGHT (LBS.)
 MMWP125I
  120V
  20A
  16A
  1/8"
  35% @ 16A
  16-3/8" x 6-3/4" x 12-5/8"
  18 lbs.
  MMWP375DVI
  120V
 20A
  15A
1/8"
  35% @ 16A
16-3/8" x 6-3/4" x 12-5/8"
  19.85 lbs.
   230V
  28A
  40A
  3/8"
  35% @ 40A
  MMWP625I
 230V
  42A
   20A to 60A
 9/16"
   30% @ 60A
  18-1/4" x 6-3/4" x 12-5/8"
  30.85 lbs.
   See page 640 for safety warnings. WWW.CORNWELLTOOLS.COM
573
  SHOP EQUIPMENT
   












































   573   574   575   576   577