Page 578 - Cornwell Product Catalog
P. 578

  576
 WELDING
   PART NUMBER
   SIZE
   SNRP760L
 L
 SNRP760X
   XL
           GLOVES, BEANIE, WIRE, BLANKETS, ACCESSORIES
SNRP760L
MIG/Stick Welding Gloves
Grain pigskin back. Reversed grain pigskin palm for better grip. Foam insulated back and cotton lined palm. Kevlar® sewn. Fully welted. Reinforced thumb strap. 5” cuff.
SNRKKSPS
Welding Beanie
100% cotton center and side panels. Elastic gathered back. 􏰗nce si􏰆e fits most.
MMW53560301
Aluminum Welding Wire 1lb. .030
A general-purpose type aluminum alloy which is typically chosen for it’s relatively high shear strength. Also offers excellent corrosion resistance when exposed to salt water. Should be considered for welding 5000 series aluminum base metals.
MMW70S603011
MIG Wire 11lb. .030
A mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases
the fluidity of the weld pool, creating a smoother bead
appearance and resulting in minimal post-weld grinding.
This wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires. Requires a shielding gas: CO2 and/or CO2 mix.
MMW70S60302
MIG Wire 2lb. .030
A mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases
the fluidity of the weld pool, creating a smoother bead
appearance and resulting in minimal post-weld grinding. This wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires. Requires a shielding gas: CO2 and/or CO2 mix.
MMW71TGS0302
Flux Core Welding Wire 2lb. .030
An all-position, single-pass, flux core welding wire
designed to weld carbon steel. The unique quality of
this product is that you do not have to use a shielding
gas. Produces smooth arc action, low spatter, full slag
coverage, and easy slag removal. The bead appearance
is not e􏰘ual to a gas􏰏shielded product, but the benefits of not ha􏰖ing to use gas makes this product extremely popular. Make sure your power source is set properly for a good, non-porous weld.
SNR3164X6
Velvet Shield® Welding Blanket
Velvet Shield® welding blanket is
made with a carbon fiber fabric
that was developed from NASA
technologies and is e􏰀tremely fire
and heat resistant. Provides protection from direct contact with weld splatter. Tough, tear-resistant material. Easy to clean - just shake, vacuum or blow metal particles off. 􏰁ithstands temperatures up to 􏰂,􏰃􏰃􏰃􏰄F. 􏰅i􏰆e􏰇 􏰈 ft. 􏰀 􏰉 ft. 􏰊􏰅􏰋􏰌 􏰍􏰎􏰈􏰏􏰐􏰑a scores􏰇 Flame Spread Index = 7; Smoke Index = 4. Meets and exceeds all standards of NFPA 􏰑􏰃􏰒 􏰓standard method of fire tests for flame resistant te􏰀tiles and films􏰔􏰕. 􏰔􏰊s tested by ITS. Copies available upon request.
SNR372NG4X6
ToughGuardTM Welding Blanket
Protects interiors, glass, and
other areas from damage
caused by nearby welding and
grinding. Made of heat-cleaned
fiberglass for economical, high temperature protection. 􏰌aterial is 􏰖ery pliable. 􏰋akes temperatures up to 1,000° F. Provides light to moderate splash protection. Size: 4 ft. x 6 ft. Weight: 18 oz. Tan in color.
MMWE60131255P
Stick Electrode 5 lb. 1/8” x 14”
A mild-steel, all position, general
purpose cellulose-base rod.
Operates on AC or DC welding current and works well on low voltage AC machines. 􏰊n e􏰀cellent choice where there is poor fit􏰏up in the 􏰙oint. Deposits easily and smoothly producing medium to shallow penetration. Small sizes are well adapted to low heat on thin metals. Medium to heavy slag is easily removed and provides for excellent weld cleaning action during the welding process. A great selection for all types of mild steel fabrications or repairs where ease of operation and good bead appearance are required.
MMWPLIERS
MIG Welder Pliers
A must have tool for anyone that
is using a wire welder. Its pointed
jaws have an outside knurl
designed to help clean slag from
the inside of a nozzle. Specially
designed grips allow you to grab
a contact tip or a MIG nozzle. Features include: Built-in nozzle cleaner, built-in wire cutter, grip for contact tip removal, grip for nozzle removal and insulated handle.
SM23230
Plugweld Pliers
Copper alloy backing
prevents burning through
thin panels as weld will not
stick. Plugweld pliers allow
user to turn up the heat for
better penetration without burn through, even if there is a pilot hole through the back panel.
  Use each tool properly..
     SHOP EQUIPMENT
























   576   577   578   579   580