Page 14 - December 2017
P. 14

  LS41500
Pickle Fork Kit
For separating
ball joints, tie rods,
Pitman arms and
other uses. Kit
consists of three
forks and two
handles; one for
hammering, the
other for use with an air hammer (.401” shank).
$49.95
$59.95
LS41220
5 Piece Thick Pickle Fork Set
$162.95
$181.45
    LS32860
GM Door Handle Spring Tool
$7.95
$8.95
The 20% Thicker Fork
Design Provides Extra Lift
When Replacing Worn Out
Ball Joints, Pitman Arms,
Pickup Track Bars and
Other Applications. The set
includes  ve forks: 11/16",
15/16", 1-1/8", 1-7/16"
and 1-5/8". The forks are
threaded to interchange
with either the handle for hammering or the pneumatic driver (.401 Shank) and a 6-1/4" extension that works with either handle to provide extra reach. The forks are heavy- duty forgings and the handles are heat-treated alloy steel.
LS42420 $19.95
    LS46800 $129.95
Allows outer door handle
replacement without
removal of the interior
door panel on GM vehicles.
Designed to prevent
damage to the door components and  nish. Works on 2014 and newer Yukon, Tahoe, Suburban, Silverado, Sierra, Impala and Escalade.
LS56200 $9.95
 Inner Tie Rod Master Set
Works on inner tie rods with inaccessible wrench flats. Includes (9) crowfeet
$149.95
Air Bag Removal Tool
$10.95
    Removes the driver side
airbag with wire spring
clips. Used on Jeep
Liberty (KK), Chrysler/Dodge mini van (RT/RM), Dodge Nitro (KA), Dodge Ram truck (DS), Chrysler PT Cruiser (PT) and Jeep Wrangler (JK). Instructions: Guide the fork end of
the tool through the access hole on the rear of the steering wheel so the fork straddles the hook. Push down on the handle to remove the wire clip from the hook. Repeat on the two other clips as the airbag is gently pulled away from the steering wheel.
LS41080 $21.95
Push Pin Pliers 30 Degree
For easy removal of plastic push pin type panel fasteners with center pins. Use in tight spaces such as wheel wells.
$21.95
   to work on
many applications. The long socket slips over the tie rod end and crowfoot engages on socket for easy removal and installation. The inner tie rod can be removed and installed without removing the rack. The kit comes in a molded case for storage.
LS68500 $109.95
LS42430 $19.95
 Push Pin Pliers 80 Degree
For easy removal of plastic push pin type panel fasteners with center pins. Use in tight spaces such as wheel wells.
$21.95
   Trim Clip Pliers, 45°
$24.95
   Drill Template for Ford Exhaust
$129.95
Specially designed double
tapered tips slide under
the clip and grip the side
of the clip, helping prevent
damage. Tips are beveled
45° providing more leverage
for easier clip removal, even
in very tight spots. Dual durometer cushioned grips for comfort.
LS41090 $23.95
 Designed
to
remove
broken
exhaust
manifold
studs on
4.6L, 5.4L
2 valve,
5.4L 3
valve
and 6.8L V10 Ford engines without damaging the block. Interchangeable plates ensure drill is centered on the broken stud. A depth gauge for drilling is marked on the template. The screw extractor is then used to remove the broken stud.
LS81780 $56.95
LS52600 $17.95
  Abrasive Pad Scraper
$19.95
   Trim Clip Pliers, 90°
$27.45
The 30° angle of the tool
provides extra leverage when
cleaning gasket surfaces. Pad
wraps around the end of the
tool to reach into tight corners
and can be repositioned on the tool as it wears. Comes with three quickly and easily replaceable 1” x 4” medium grit pads.
LS69620 $28.95
  Specially designed double
tapered tips slide under
the clip and grip the side
of the clip, helping prevent
damage. Tips are beveled
45° providing more leverage
for easier clip removal,
even in very tight spots. Dual durometer cushioned grips for comfort.
5 Piece Wedge Assortment Set
$32.95
    Carbide Gasket Scraper Set
$64.95
Strong and impact resistant
when used to pry against trim or
metal body panels. Used for all
types of trim removal including
side molding, window trim, door
handle trim, grill trim and bumper moldings. Made of glass reinforced nylon. Neon orange for visibility.
LS67300 $17.95
 Designed to remove
gasket residue
from steel and
aluminum heads
and manifolds, along
with carbon build-up
and even rust. Can
be used to clean disc
brake caliper slides.
Tungsten carbide tips are attached to the steel blade that is molded into the comfortable 6” long handle. Two blade widths, 1-1/4” and 5/8” to work on many applications. Tips remain very sharp and are precision ground. Includes: LS81760 1-1/4” Carbide Gasket Scraper and LS81770 5/8” Carbide Gasket Scraper
LS35240
Belt Molding Tool, Small
$18.95
$21.95
    Unique flared head design
and beveled edges allow
the tool to be inserted
under the molding at an
angle. Makes removal of
newer belt moldings easy. For clipless moldings, the tool
is twisted or pulled back to release the molding from the door tab. For moldings with metal clips, hook the tool under each clip and pull up. Quickly removes belt molding without damage. Works on most domestic and import vehicles.
Magnetic Bowl
Multi-position magnetic bowl features a strong magnetic base that attaches securely to vehicles, tool boxes, bins, hoists and any other ferrous metal object. 6” diameter cup. Magnet can hold up to 5 lbs. in a vertical position.
$19.95
      NOTE: All items shown in this  yer are limited in quantities and subject to availability. Please also note that the printed color may di er from the actual color due to variations 14 WWW.CORNWELLTOOLS.COM in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.
  
   12   13   14   15   16