Page 20 - January 2018
P. 20

Inner Tie Rod Tool
Works on inner tie rods with inaccessible wrench flats. Tool utilizes six crowfeet, sizes 1-3/16”, 1-1/4”, 1-5/16”, 1-7/16”, 1-1/2” and 33.6MM to engage the wrench flats.
OWC6275 $82.95 5 Piece Tie Rod Adjusting Tool Set
Permits 360° rotation of the adjusting sleeve where space is limited. Accommodates 1/2” drive ratchet or breaker bar.
LS41400 $64.95 Stepped Pickle Fork Kit
Step design helps keep
tool from bouncing
back when separating
ball joints, steering
dampeners, tie rods,
Pitman arms and other
applications. Six tools
in one. Three forks and two handles. Forks are threaded to interchange with either handle. One handle for hammering; one for use with an air hammer (.401” shank).
OWC6295 $179.95 Front End Service Set
Allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints. Press-type ball joint separator allows for ball joint removal without the damage to boots and other parts that fork-type removers may cause.
HR90200 $79.95
HD U-Joint Puller
TDR Digital Tire Inflator
The TDR Digital features include a tough aluminum housing, dual shock bumpers, coil spring hose protection, dual hold on chuck, and a back lit digital display. Inflates up to 174
PSI with an accurate multi scale gauge, which has auto on and auto off. Certi cate of calibration. Tough precision die cast body. Battery Life (2 AAA): 80 hours.
Bearing Race and Seal Driver Master Set
Insert wheel bearing race and seals without damage to race and axle housing. Includes handle and nine driver sizes (Range: 1.565” to 3.180”)
to  t most standard wheel bearings in a plastic blow- molded case.
Fluid Dispensing System
     This heavy duty tool is used to remove
the HD vehicle driveline U-joints using
an impact wrench up to 1". Disassemble
and reassemble U-joint cups without
heat or hammering. Larger diameter
threaded shaft can handle U-joints that
are severely seized and require higher
force to pull and install. Major tool components are heat treated for improved strength and durability. Smoother thread allows for a lower, more consistent effort to rotate shaft. Designed to  t all Class 7 and 8 trucks, including a wide variety of drivelines from Spicer and Meritor, making shop operations more ef cient and reducing cost.
Heavy Duty U-Joint Puller
A heavy duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and
8 trucks and machinery. Engineered
     for use with up to a 1” impact tool.
Eliminates dangerous vice and socket,
or hammering removal methods. Does
not damage the driveshaft, yokes, joints or bearing cups.
One piece unit without bolts, cables, or assembly required. Applications include: U-Joints with bearing cups 1.5” to 2.2” O.D.; Spicer 1610, 1710, 1760, 1810, 1880 Series; Spicer SPL 140, 170, & 250 Life Series; Meritor (Rockwell) 16N, 17N, 18N, 1710 Series; Meritor RPL 20, 25 Permalube Series.
HR31 $24.95
     Bearing Puller
When working space is limited, this type of puller is needed to remove flywheel pilot bearings from automobiles, trucks, and tractors. Only 7-1/2” long. Can be used to pull bearings or bushings from generators and starters. Includes: 1/2” to 1-1/4” (13-32MM) I.D. capacity jaws
Dispenses fluids to  ll or
top-off master cylinders,
coolant bottles, automatic
transmissions, differentials,
and power steering and other
reservoirs. Includes: 1.2 gallon
(5-liter) fluid reservoir, reservoir
lid with integrated manual
pump, pressure gauge, pressure
relief valve, fluid dispensing
hose with flow control and auto-shutoff valves, fluid dispensing wand and hanging hook
NEMV6870 $109.95
     CPP5 $18.95
Vacuum Brake Bleeder
Cotter Pin Puller
Blade is made of durable steel with black  nish. Length: 8”.
      Master Spring Compressor Kit
and installs coil springs quickly
and safely. Compress coil springs on
all passenger cars and pick- up trucks.
HR506 $84.95
Uses compressed
shop air between 60
and 150 PSI, to create
a powerful vacuum
for bleeding brakes
or hydraulic clutches.
Convenient for any
shop, this rugged tool
turns brake bleeding
into a clean, quick, one-
man job. Compact 1.3 quart (1.2 liter) capacity reservoir. Comfortable lever-action throttle with lock-on latch. 4 ft. long bleed hose with molded support. Universal bleed screw adapter conforms to most common bleed screw sizes. Integrated muffler ensures quiet operation. Includes two replacement bleed screw adapters.
  Adjustable Bearing Seal Driver
   All in one design eliminates the
need for a driver and different size
adapters. Locking screw holds the
adjustable jaws in place for one
hand use. Durable sturdy aluminum
construction, equipped with a steel capped striker shaft handle. 3-stepped jaws quickly adjust to accommodate bearing races and seals from .708” – 3.543” (18MM – 90MM).
  NOTE: All items shown in this  yer are limited in quantities and subject to availability. Please also note that the printed color may di er from the actual color due to variations in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.
   18   19   20   21   22