Page 20 - June2018
P. 20

 HRC4579 $116.95LS38210 $3.95MCL72475 $558.01
   9 Way Puller Set
$133.34
Hub Removal Kit for Dodge
Separates the frozen hub assembly from the steering knuckle on Dodge vehicles. Prevents damage to the knuckle and complete hub assembly.
OW6576S
Dodge Hub Service Set
Used to remove stubborn hubs.
Provides two methods: (1) The
OW6576 hub pressing tool can
be used to press off the hub with
the aid of the power steering.
The tool locates spacers between the U-Joint yoke and axle housing. Unique design makes this a one person operation to remove the hub with the bearing intact; and (2) in the event the hub pressing tool does not budge the hub, the OW6577 hub bearing housing puller is used. This may separate the bearing, but the unique dual pattern design fits both the wheel hub and bearing housing, capable of applying 20 tons of force.
OW6575 $699.95
Universal Hydraulic Flaring Tool Kit
New hydraulic flaring tool design
features: improved hydraulics,
tube & die stabilizing arm for easy
tube cutting, magnetic adapter
holder which helps keep adapters
in place and enlarged die set
compression area for better grip
of dies. Fabricates push connect 1/4”, 5/16”, and 3/8”;
GM fuel line flare, brake lines and transmission 5/16” and 3/8”; flare/double flare 3/16”, 1/4”, 5/16”, 3/8”, and 1/2”, and metric bubble flaring 4.75MM, 6MM, 8MM, and 10MM. Comes in a custom molded box.
LS67000
Master Line Stopper Kit
Includes four stoppers to seal lines in automotive flare type steel brake lines, power steering and transmission cooler lines. Stopper sizes from 1/8” through 1/2”. Caps are 5/8” and 3/4” for larger lines.
PBT71106
Steel Line Stopper Kit
Four piece kit used
to seal steel lines
once disconnected.
Prevents fluid leaks
and contamination during service. Use with all automotive fluids. Suitable for: fuel rails and lines, flare type steel brake, fuel and A/C lines, Banjo fittings on brake, power steering and transmission cooler lines. Installs in seconds.
$52.75
     Pulls flange-type rear axles
and most front wheel
drive hubs. Internal and
external jaws provide a
variety of combinations to
pull bearings, gears and
seals. Two and three-way cross blocks and cone provide the perfect jaw configuration for most jobs. Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
HR904
FWD Wheel Bearing Adapter Kit
For use on front wheel drive cars and light trucks. The wheel bearing adapters allow the user to replace the wheel bearings with the steering knuckle and strut assembly intact on the vehicle. Eliminates the need
for a front end alignment once completed.
JP3100DTI $89.95
$349.95
   $409.95
   $149.95
$169.95
$74.95
   $87.95
    TDR Digital Tire Inflator
The TDR Digital features include a tough aluminum housing, dual shock bumpers, coil spring hose protection, dual hold on chuck, and a back lit digital display. Inflates up to 174 PSI with an accurate multi scale gauge, which has auto on and auto off. Certificate of calibration. Tough precision die cast body. Battery Life (2 AAA): 80 hours.
LS56650
Adjustable Seal Puller
Head adjusts to five
positions. Two hook
sizes easily remove
most oil and grease
seals. The adjustable head works great on front wheel drive transaxles. Also works on front crankshaft seals without removing the radiator.
HR506
Adjustable Bearing Seal Driver
All-in-one design eliminates the
need for a driver and different size
adapters. Locking screw holds the
adjustable jaws in place for one
hand use. Durable sturdy aluminum
construction, equipped with a steel capped striker shaft handle. 3-stepped jaws quickly adjust to accommodate bearing races and seals from .708” – 3.543” (18MM – 90MM).
HR976
8 Piece 12 Point Axle Socket Set
Fits axle nuts and automatic transmission tail output shafts on Toyota, Lexus, Chrysler, Dodge, Jeep, Audi, Volkswagen and BMW, as well as many other makes. Includes sizes: 29MM, 30MM, 32MM, 34MM, 35MM, 36MM, 38MM, and 39MM
Hub GrapplerTM
$799.95
$99.95
The complete solution
for servicing wheel
hubs and bearings on
the vehicle without
removing the steering
components or knuckle.
This eliminates
unnecessary alignments or the use of a shop press, cutting service time dramatically. The Hub GrapplerTM Puller is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time.
$27.96
    $34.95
    $15.95
$19.75
$189.95
BODY SERVICE
  NEMV6400
Fluid Dispensing System
Dispenses fluids to fill or top-off
master cylinders, coolant bottles,
automatic transmissions,
differentials, and power steering
and other reservoirs. Includes:
1.2 gallon (5-liter) fluid reservoir,
reservoir lid with integrated
manual pump, pressure gauge,
pressure relief valve, fluid
dispensing hose with flow control
and auto-shutoff valves, fluid dispensing wand and hook
  $221.29
   KTEART903M
$287.95
 $84.95
$99.95
Tram Gauge $319.55
     LS81850
Brake Lining Gauge Set
$1
$4
hanging
9.95
$24.15
Telescoping aluminum tram gauge. Metric and English readings. Measures from 29” to 116”. Comes with 4 pointers with 2 nylon storage bags.
AS1426CW
1/4” Heavy Duty Hand Riveter
Extra
long
handles
provide
excellent
leverage. Spent mandrels are collected in the plastic container for safety and ease of disposal. Tool length: 20- 3/4”. Includes 5 nosepieces: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”.
    $129.95
Allows brake pad wear to be accurately and consistently measured without guessing. Gauges are color coded to match SAE or Metric recommendations for brake pad replacement.
$149.95
$32.95
$39.95
      PBT71154
Brake Spring Pliers
3.96
 Designed to remove and install all retaining spring
$54.95
 washers.
  20 CORNWELLTOOLS.COM
NOTE: All items shown in this flyer are limited in quantities and subject to availability. Please also note that the printed color may differ from the actual color due to variations in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.
  9
        
   18   19   20   21   22