Page 10 - Index
P. 10

 PRIC4D600F36H
3/4" Torque Wrench/Breaker Bar Set
The “split-beam”
torque measuring
mechanism
provides
consistent
accuracy throughout the torque setting range. Length is designed to provide the leverage required for maximum torque applications and provide the needed reach for those hard-to-get-at places. Maximum Torque Setting:
600 ft.-lbs. Minimum Torque Setting: 200 ft.-lbs. Torque Setting increments: 10 ft.-lbs. Accuracy: ±4%. Reversible ratchet head. 32 teeth. 12° Swing. Overall length: 48”. Push button breaker bar handle allows selection of desired length up to 41”. Designed to work exclusively with the detachable 3/4” or 1” Precision Instruments ratchet head.
3/8” Drive Digital Torque Wrench with Angle Indicator
CTG3000ANG
Range: 5-99.5 ft.-lbs.
1/2" Drive Digital Torque Wrench with Angle Indicator
CTG5000ANG
Range: 15 - 300 ft.-lbs.
Flex head design ± 2% accurate clockwise, 4 settings: ft-lbs., in-lbs., Nm, Kg-cm. Ability to use up to 9 pre-set settings. Memory for up to 50 readings. 12 LED lights provide visual signal, and buzzer for audible signal. 4 digit LCD display. Uses "AA" batteries (included). Comes in a blow-molded case.
CTGPC15KIT
15 Piece Punch and Chisel Set
Includes: Punch and chisel handle, 13MM flat chisel, 16MM flat chisel, 19MM flat chisel, 22MM flat chisel, 25MM flat chisel, 3MM taper punch, 40MM curved blade, 5MM center punch, 5MM pin punch, 6MM cape chisel, 6MM pin punch, 60MM flat blade, 6MM taper punch, point chisel
KDP6S
6 Piece Long Tapered Drift Punch Set
1/8” to 3/8”
10
$19.95
$229.95
$599.95 CEC4HPS
4 Piece Hook & Pick Set with Magnets
Includes: Straight
Pick w/ Magnet,
Angle Pick w/
Magnet, Hook
Pick w/ Magnet
and O-Ring Pick w/ Magnet
LS80380
5 Piece Hose Remover Set
Contains long
and short,
standard and
offset hooks.
Can be used to
remove hoses,
moldings, clips,
clamps, seals,
o-rings, cotter
pins, gaskets,
etc. Handles are dual material for comfort and grip.
CTGORS
4 Piece Seal & O-Ring Removal Set
Includes: Short Contoured
Tip O-Ring Remover, Long Contoured
3/8" bluePOWER® Stubby Impact Wrench
CAT2138 Blue
$670.00
$24.95
CAT2138G
$267.95
  Neon Green
                            $39.95
Breakaway Torque: 550 ft.-lbs., Max. Torque: 350 ft.-lbs.
3/8” bluePOWER® Super Duty Impact Wrench
Breakaway Torque: 600 ft.-lbs., Max. Torque: 370 ft.-lbs.
   $49.45
 CAT2150 $269.95
   $325.95
       $389.95
  $436.95
    $31.95
IRC5000Q
Premium 3/8" Quiet Ultra Compact Impact Wrench
Breakaway Torque: 475 ft.-lbs., Maximum Torque (Forward/Reverse): 310/380 ft.-lbs.
$275.95
$224.95
     $462.95
$36.95
    $515.95
               $59.95
$53.95
Tip O-Ring
Remover,
Short Spoon Tip O-Ring Remover, Long Spoon Tip O-Ring Remover
FW741011502
Electronic Caliper
Accuracy:
±.001/.02MM.
Range:
6”/150MM.
Resolution: .0005”/.01MM. Direct inch/metric conversion. 4-way measurement - inside, outside, depth and step. Stainless steel frame. Large, easy to read display. Includes molded case.
FW72585155
X-Proof® Water Resistant Indicator Set
Dust, water and oil resistant. Magnetic base. Fine adjustment. Base dimensions: 2” x 2-11/32” x 1-13/16”. 85 lb. pull. On/off lever release magnet. V-base for placing on round surfaces. X-Proof Indicator. Travel: 1”. Reading: .001”. Continuous reading: 0-100. Tolerance markers. AGD Group 2, 2-1/4” diameter.
IRC5500 $224.95
 $47.95
Premium 1/2" Ultra Compact Impact Wrench
Breakaway Torque:
625 ft.-lbs., Maximum Torque (Forward/ Reverse): 360/450 ft.-lbs.
CAT4112
1/2” bluePOWER®     $272.95 Stubby Impact
Wrench
$275.95
      $67.95
        $219.95
      $86.95
  $96.95
     $193.95
Breakaway Torque: 600 ft.-lbs., Max. Torque: 450 ft.-lbs.
IRC8000
1/2" Impact       $369.95 Wrench
Nut-Busting Torque: 1,100 ft.-lbs., Maximum Torque (Forward/Reverse): 600/780 ft.-lbs.
 $278.13
$279.95
              CORNWELLTOOLS.COM
NOTE: All items shown in this flyer are limited in quantities and subject to availability. Please also note that the printed color may differ from the actual color due to variations in the printing process. Cornwell®, the Ironman Logo, The Choice of Professionals® and bluePOWER® are registered trademarks of the Cornwell® Quality Tools Company.
   8   9   10   11   12